Lead Painter
San Jose State University
San José
hace 3 días

Location : San José

Categories : Unit 6 - Teamsters Local 2010, Probationary, Full Time, Trades

Job Summary

The Lead Painter, assigned to the Paint Shop within the Maintenance & Operations unit of Facilities Development & Operations, works under general supervision and provides lead direction for journey-level crafts workers and semi-skilled assistants, laying out and coordinating the work flow for the shop, preparing materials lists, and ordering supplies in addition to performing work as a skilled painter.

Staff within the Paint Shop are responsible for a full range of journey-level skilled work in painting, finishing and maintaining a wide variety of interior and exterior surfaces and structures, to ensure a clean, safe and attractive learning environment.

The Maintenance & Operations unit of Facilities Development & Operations provides services to a University campus spread across five sites comprised of +170 acres, 52 buildings, and more than six million gross square feet.

The Paint Shop is one of seven skilled trades shops within Maintenance & Operations and is comprised of a lead painter plus four journey-level painters.

The Shop reports up to a Facilities Project Supervisor who provides supervision and guidance.

Key Responsibilities

  • Performs as a journey-level painter in association with basic and advanced maintenance and repair work
  • Prepares a variety of surfaces for painting and finishing, including standard wall finishes, stucco, and plaster
  • Applies undercoats and finish coats using a full range of application methods including brush, roll, spray, and electro-static spray
  • Hangs paper
  • Installs drywall, mudding, taping, and finishing (up to Level 5)
  • Mixes and matching paints and finishes
  • Paints signs and parking lots / roadway markings
  • Performs sand and water blasting
  • Erecting scaffolding, hang rigging from electronic staging, and / or use electronic lifts or personnel ladders in the performance of duties
  • Reads, interprets, and works from plans, drawings, and specifications
  • Ensures work performed is completed in a manner conforming with plans, specifications, and building code and safety requirements
  • Cleans and maintaining materials, tools, and equipment used in the performance of duties
  • Performs all work in accordance with established safety procedures
  • Maintains a clean and safe work environment
  • Work may involve exposure to hazardous materials such as paint thinners, lead, and asbestos. Performs abatement, where certified
  • Consults and works with other trades workers
  • Operates power tools and shop equipment including but not limited to a tint machine, shaker, grinder, power makita, air sander, shop vacuum, portable generator, swing stage, and manlift
  • Reviews work order system to understand and plan for preventative, deferred, and reactive maintenance work efforts in a manner aligned with the priorities communicated by the appropriate administrator
  • Ensures preventative maintenance and other work orders designated as high priority are completed on schedule
  • Prepares for and plans work including development of material / supply needs lists and ordering supplies through the warehouse and business office so as to pursue the work according to schedule.
  • Ensures adequate and appropriate warehouse stock supplies are on hand

  • Develops rough sketches / diagrams and corresponding cost estimates and projected schedules for communication with the business office and customer
  • Develops labor resource schedules and communicates assignments to assigned workers, making adjustments and coordinating with other shops, where necessary
  • Lays out, directs, assists and coordinates the work flow for assigned work including project planning and coordinating with other shops where necessary
  • Inspects the work to ensure it meets quality requirements and specifications
  • Instructs shop members in industry best practices and safety rules through regular shop and safety meetings
  • Provides instruction and lead direction to unskilled and semi-skilled assistants
  • Inspects completed work for conformance with specifications, requirements, compliance with applicable building and safety codes and regulations
  • Ensures computerized record keeping systems are maintained with all work efforts documented accurately
  • Communicates with customers in a professional manner to keep them informed of work efforts
  • Provides feedback to the appropriate administrator concerning staff work performance including productivity, quality, teamwork, and communication
  • Advises on set-up and layout of the shop as well as the selection, ordering and storage of equipment and supplies
  • Consults with shop staff to obtain feedback on recommendations
  • Ensures Paint Shop remains neat and tidy at all times and that tools and equipment are properly cared for and stored safely
  • Prepares standard reports, including preparation of as-builts for database updates
  • Acts as shop supervisor in absence of the Facility Project Supervisor
  • Knowledge, Skills & Abilities

  • Thorough knowledge of the methods, materials, tools and equipment used in the painting trade including painting, finishing, drywall, and paperhanging
  • Thorough knowledge of the applicable state codes and regulations, including the Safety Orders of the Division of Industrial Safety of the State of California
  • Working knowledge of effective supervisory practices and techniques and the ability to lead, instruct and coordinate the work of a small group or crew of skilled and semi-skilled workers as well as provide instruction to unskilled and semi-skilled assistants
  • Ability to provide lead work direction including supervising and instructing in the necessary work efforts and safety rules that must be adhered to
  • Ability to make rough sketches, accurately estimate time and costs as well as necessary supplies and materials needed for assigned work, and to ensure work is performed in sequence
  • Ability to prepare surfaces for painting and finishing including drywall and plaster as well as remediate rusted metal surfaces
  • Ability to apply undercoats and finish coats using the full range of application methods including brush, roll, spray and electro-static spray
  • Ability to select the most appropriate materials, mix paints and finishes and match colors, erect and work from scaffolds, rigging, ladders, personnel lifts, and apply paints and finishes neatly and accurately
  • Developed organizational skills to allow for the establishment of priorities and labor resource assignments to accomplish work within budget and labor resource constraints while meeting the required schedule
  • Working knowledge of practices and procedures of safety and emergency preparedness and ability to respond appropriately to such situations
  • Knowledge and ability to complete work in conformance with drawings, plans, and specifications, requirements and compliance with applicable building and safety codes and regulations
  • Ability to inspect work performed by others to ensure adherence to requirements and industry practices
  • Ability to ensure shop, equipment, and tools are properly cleaned, maintained, and securely stored with shop being kept neat and tidy at all times
  • Knowledge in the use of computers and technology including email, word processing, and spreadsheets
  • Ability to use enterprise software systems to track work orders, obtain supplies, document work efforts, and maintain records
  • Ability to read and write at a level appropriate to the position; read and interpret blueprints, and perform arithmetic calculations as required to perform the duties assigned
  • Ability to prepare standard reports that may require one to organization information, ideas and concepts in a written or presentation format
  • Ability to learn and maintain knowledge of a variety of state, federal, CSU, and SJSU policies and procedures pertaining to assigned duties
  • Ability to implement a positive customer service approach, with a commitment to high ethical standards, while maintaining focus on solving problems or issues effectively and in a professional manner
  • Ability to communicate effectively and work harmoniously with a diverse group of individuals who are directly or indirectly involved with assignments and projects
  • Ability to foster and participate in a positive, cooperative, productive teamwork focused atmosphere and maintain positive working relationships with a diverse population including those from various backgrounds
  • Ability to understand and embrace priorities for work assignments while also maintaining flexibility to accommodate changes while meeting deadlines despite intermittent interruptions
  • Ability to operationalize sustainability concepts (economic justice, social justice, environmental justice) into all aspects of performing job duties
  • Ability to perform strenuous work in potentially hazardous environments
  • Ability to pass a physical which enables the use of a half-face respirator
  • Possession of a valid California driver’s license and maintain a driving record that allows for the operation of any vehicle or equipment required in the performance of duties
  • Must be able to successfully complete the Defensive Driver Training Program provided by the State of California for CSU campuses and pass the course exam
  • Required Qualifications

  • Must possess those abilities normally would be acquired through any combination of progressively responsible training and experience which demonstrates achievement of journey-level skills equivalent to that acquired through completion of a standard painter’s apprenticeship program
  • One to two years of experience as a journey-level painter that included work coordination responsibilities
  • Must participate in all OSHA required physicals and examinations
  • License

    A valid driver's license is required for this position. Out of state candidates selected for the position must obtain a State of California driver's license within 10 days of hire in accordance with the California Department of Motor Vehicles regulations.

    Once hired the employee must successfully complete the Defensive Driver Training Program provided by the State of California for California State University campuses.

    Preferred Qualifications

  • Possession of a current California lead worker certification
  • Experience in maintenance of a State facility, College or University, or other multi-facility complex
  • Working knowledge of effective supervisory practices and techniques
  • Compensation

    Classification : Lead Painter

    Anticipated Hiring Range : $5,742 / month - $6,160 / month

    CSU Hiring Range : $5,742 / month - $7,414 / month

    San José State University offers employees a comprehensive benefits package typically worth 30-35% of your base salary. For more information on programs available, please see the Employee Benefits Summary .

    Reportar esta oferta
    checkmark

    Thank you for reporting this job!

    Your feedback will help us improve the quality of our services.

    Inscribirse
    Mi Correo Electrónico
    Al hacer clic en la opción "Continuar", doy mi consentimiento para que neuvoo procese mis datos de conformidad con lo establecido en su Política de privacidad . Puedo darme de baja o retirar mi autorización en cualquier momento.
    Continuar
    Formulario de postulación